<\/span><\/h3>\nNow we’ll take the four cells out of the battery holder. To do this, loosen the screw in the middle of the cover<\/b> with a PH1 Phillips screwdriver.<\/p>\n
The cover now has some play. Attention: The two connecting cables are extremely short!<\/b> Don’t pull too hard on the cover, so the cables don’t tear off. You should only tilt or incline the cover slightly to the side.<\/p>\n\n- Carefully tilt the cover to the side.<\/li>\n
- First, take out the right cell<\/b> to make space.<\/li>\n
- Tilt the left cell<\/b> next to it over the empty space of the already removed right cell and take it out as well.<\/li>\n
- Now you have enough room to fold the cover to the side so that it hangs loosely on the short connection cable, allowing you to easily remove the two remaining batteries.<\/li>\n<\/ul>\n
The following picture shows you how I proceeded step by step when removing the batteries. Here you can also see in the pictures that at this point I had not made the polarity marking on the battery cover, but already on the cells, which doesn’t really help once they are removed \ud83d\ude09<\/p>\n